Surgiline 2000E Ameliyat Masası, Elektrohidrolik
Smooth Operation, Maintenance-Free, Flexible, Adjustable, Sturdy...
Surgiline 2000E Surgical Table is designed to accommodate different patient positions required for demanding surgical procedures, with an ultimate focus on patient and user safety. The table is constructed with stainless steel and high quality materials to provide durability and long operating life.
Surgical positions of Surgiline 2000E are adjusted by an electrohydraulic system. Surgiline 2000E Surgical Table has up/down, sliding, Trendelenburg/reverse Trendelenburg, right/left lateral, renal surgery, Trendelenburg and back section upward combination, and back section tabletop positions. Positions are adjusted with remote control, in a quite and nonvibrating manner at constant speed.
Surgiline 2000E Surgical Table is equipped with battery recharge system. Movements of the table are fed from battery circuit. Battery power of the table has a 30 minutes operating time in cases of mains failure providing approximately 30 complete position changes.
The tabletop consists of four sections: head, backrest, seat and leg, each with removable, easy to clean, anti-bacterial, and waterproof 80 mm mattress for patient comfort.
Easy to install optional radiographic tabletop kit* enables using Surgiline 2000E for X-ray procedures. Sliding motion of the tabletop enables Surgiline 2000E Surgical Table compatible for use with C-Arm radiological equipment.
The durable cast iron table base and electrohydraulic piston is covered with stainless steel. The “T” shape design of the Surgiline 2000E allows easy access to the tabletop in any position. Special brakes and anti-static casters allow ease of mobility. Stainless steel side rails accept a variety of available accessories.
Surgiline 2000E is a state-of-the-art product and with both quality and competitive pricing it is an excellent choice for todays demanding surgery theaters.
Tüm Ürünlerimizle İlgili Detaylı Bilgi İçin Muayenehane ve Ameliyathane Çözümleri Kataloğumuzu İndirin!
Ref: M2C 650 0 0
Teknik Özellikler
Yükseklik: 725 - 1055 mm
Yükseklik (Minder ile): 805 - 1135 mm
Minder kalınlığı: 80 mm
Masa üstü: 500 x 1880 mm
Masa tabanı: 370 x 830 mm
Baş bölümü: 500 x 240 mm
Sırt bölümü: 500 x 490 mm
Oturma bölümü: 500 x 510 mm
Ayak bölümü (Sağ): 235 x 555 mm
Ayak bölümü (Sol): 235 x 555 mm
Şebeke/jeneratör giriş voltajı: 100-240 V, 50/60 Hz
El kumandası voltajı: DC 5V
Motor girişleri: DC 24V, 10A
Akü tipi: 2 adet 12V, 7Ah’lik kuru tip, bakıma ihtiyaç duymayan
Akü şarj voltajı: DC 27.2V
Düşük şarj seviye ikazı: Sesli ikaz
Akü şarj süresi: 18 saat (tam şarj)
Pozisyonlar
Baş bölümü: 15° yukarı, 90°aşağı, sırt bölümünden 5 cm uzaklaşır, çıkarılabilir.
Sırt bölümü: 75° yukarı, 45° aşağı, 45° yukarı (Radyografik masa üstü seti ve minder ile)
Ayak bölümü: 15° yukarı, 90° aşağı, 90° yana açılabilir, çıkarılabilir, bağımsız hareket.
Lateral: 20° sağ, 20° sol
Trendelenburg: 25°
Ters-Trendelenburg: 25°
Böbrek cerrahisi: 135°
Refleks: 105°
Fleks: 225°
Masa üstü: Taban sabit 355° döner, 250 mm yatay hareket (sliding)
Standart Aksesuarlar
Anestezi çerçevesi (1 adet)
Serum askısı (1 adet)
Ameliyat masası kol destek
(2 adet)
Vücut kemer grubu (1 adet)
İsteğe Bağlı Aksesuarlar
Vücut destek
Omuz destek
Kol destek
Ayak destek
Bilek kemeri
Kol kemeri
Bacak kemeri
Diz destek
Diz bölümü
Baş bölümü - Yükselebilir
Litotomi bacak askısı
El/kol cerrahi tablası
Röntgen kaset sürücü
Atık toplama
Karbon fiber ayak uzatma
Artroskopik diz destek
Artroskopik omuz destek
U-tipi baş bölümü
Çivili başlık
Çivili başlık oturma pozisyonu
bağlantı parçası
Çivili başlık ve U-tipi baş bölümü için aksesuar sehpası
Spinal cerrahi çerçevesi
Kompakt laminat ayak uzatma
Litotomi bacak pozisyonlandırma botu
Obezite litotomi bacak pozisyonlandırma botu
Proktoloji parçası
Kompakt aksesuar sehpası
Ortopedik traksiyon
Ambalaj Bilgileri
Net ağırlık: 250 kg
Brüt ağırlık: 295 kg
Ambalaj ölçüleri: 1000 x 1680 x 1100 mm